Shanghai Rome Art Paint Co.,Ltd

+86 13062758269
Sport Flooring  Materials
Composite plastic track
分享到:
Composite plastic track
Product Details

Introduction of compound plastic track
There are two types of composite plastic track. One is to pave 8-9mm with the elastic layer of the breathable plastic track, and the surface layer is pave 4-5mm with EPDM rubber particles. The paving method is the same as that of the elastic layer. This process is simple to construct. , But the surface layer is relatively flat, more suitable for the court, and generally not accepted. The other is a runway that combines a breathable plastic runway and a hybrid plastic runway, that is, a runway made of the elastic layer of the breathable runway and the surface layer of the hybrid runway. It is generally suitable for the foundation of cement concrete. The surface layer requires a hybrid type. The composite runway produced by our company not only guarantees the stability of the combination of the cement foundation and the plastic bottom surface, and meets the national standards, mechanical paving, mechanical spraying, excellent flatness, no threshing phenomenon, and improved surface quality. Pores, water-permeable, air-permeable, excellent elasticity, no blistering. It can be used all-weather, with strong abrasion resistance, good weather resistance, strong compression resistance, good impact resistance, strong and durable. The price is economical, and it provides users with more choices for laying satisfactory runways.

塑胶跑道结构图02.png

Features of compound plastic track
1. The cost of composite plastic track is about 15% lower than that of hybrid plastic track;
2. The upper layer of the composite plastic track is made of pu particles or epdm weather-resistant and environmentally-friendly colored particles, sealed with water-permeable polyurethane, and the lower layer adopts a mechanical construction cushion;
3. The composite traditional plastic track sports field has a better surface drainage function. The rain and snow in the alpine area cannot enter the elastic layer of the plastic track. Once the weather returns
Warm, the ice and snow melt on the surface of the composite traditional plastic runway, through the natural drainage of the runway slope, without any adverse effects on the runway;
4. The composite plastic track is generally suitable for the case where the foundation is cement concrete and the surface layer is required to be mixed. Shanghai Yibangli composite plastic track meets national standards,
Mechanical paving, mechanical spraying, excellent flatness, no threshing phenomenon, improved surface quality, with pores, water permeable, breathable, excellent elasticity, and no blistering;
5. The composite plastic track can be used all-weather, with strong abrasion resistance, good weather resistance, strong compression resistance, good impact resistance, sturdiness and durability, and economical price;
6. Compared with sports venues such as breathable plastic track, hybrid plastic track and pre-cast rubber track, the appearance of composite plastic track sports venue is similar to that of hybrid plastic.
The track is the same, except for the tensile strength, other data is basically the same as that of the hybrid plastic track.

Composite plastic runway construction technology
1. Use a roller brush to apply the single-component glue or primer evenly on the cement foundation;
2. Before the primer is cured, mix the one-component glue with EPDM particles according to the specified ratio, mix them fully with a mixer, and transport them to the paving site, and use the paver according to the regulations.
Pave the thickness; after curing, it becomes an elastic layer.
3. Construction of impermeable layer: use the two-component mixed-type runway special paving material for the A and B component materials to be proportioned according to the specified ratio, stir evenly, and remember to follow the temperature and
Add an appropriate amount of catalyst to the humidity change to form a mixed-type track special paving composite material, add an appropriate amount of quartz sand to batch scrape the bottom and wait for it to solidify.
4. The anti-skid wear-resistant surface layer currently has two methods: particle spraying and spraying: the rubber particle spraying process is to scrape the composite material with a thickness of 2 mm on the elastic layer, and spray it evenly by hand.
EPDM rubber particles or PU rubber particles, after curing, sweep away the excess EPDM particles that are not adhered to the surface, and finally spray a layer of reinforcing glue on them;
5. The spraying process is to add the sprayed fabric to the appropriate amount of EPDM rubber particles and stir evenly, and spray it directly on the surface of the elastic layer with a special spraying equipment.
6. Use polyurethane marking paint to accurately measure the position of the process line in accordance with the current track and field facility standards, and then spray it.

Add:11L, No. 8519, Nanfeng Road, Fengxian District, Shanghai
Tel:+86 13482793679    +86 13062758269
E-Mail: linguixiang@ybldp.com
      mura@ybldp.com


+86 13482793679
Shanghai Rome Art Print Co., Ltd